This was sidelined a couple of years back when it developed seam leaks and the wooden transom started to come away from the tubes.
I bought some of the 2-pack glue and always meant to repair it, but never got around to it although I did detach the rubbing strip around the bow. The glue has now gone off in the tin..
Apart from the glue problems the fabric is unmarked, unpunctured and could probably make a good dinghy again.
Going in the skip tomorrow (along with all the CRT televisions and monitors I've been keeping 'just in case'), so if anyone wants it instead please shout.
Located Fife or Creran.
Narwhal MR240 inflatable
-
- Midshipman
- Posts: 5
- Joined: Thu Jan 13, 2011 12:48 am
- Boat Type: Nantucket Clipper
- Location: home edinburgh boat oban
Re: Narwhal MR240 inflatable
Yes please to the inflatable. Will send PM.