Towing a rigid dinghy

Post your handy hints and tips here - with pix if possible. Lavish prizes may be awarded from time to time.
Post Reply
ubergeekian
Old Salt
Posts: 426
Joined: Fri May 27, 2011 1:48 pm
Boat Type: Victoria 26

Towing a rigid dinghy

Post by ubergeekian »

When you're towing a rigid dinghy, the painter tension (and thus the effect on speed) is significantly less if you adjust the length so that the dinghy is constantly falling down one of the waves in your wake and not trying to climb up it.
Never attribute to malice that which is adequately explained by stupidity - Hanlon's Razor
But don't rule out malice - First Corollary to Hanlon's Razor
Ghillie
Master Mariner
Posts: 169
Joined: Fri Apr 04, 2008 8:01 pm
Boat Type: Sigma 38
Location: Dallens Bay

Re: Towing a rigid dinghy

Post by Ghillie »

Good idea, a corollary to that would be to remember to be careful if deciding to reverse to set an anchor. We managed to wrap a floating line round the prop doing so in a chartered cat having been told to make sure we towed the dinghy with lots of painter out. (and to haul the dingy in before reversing....) The cost of the replacement painter was very high.
User avatar
Silkie
Admiral of the Fleet
Posts: 3475
Joined: Sat Mar 05, 2005 12:55 pm
Boat Type: Hurley 22
Location: Bonnie Scotland
Contact:

Re: Towing a rigid dinghy

Post by Silkie »

ubergeekian wrote:When you're towing a rigid dinghy, the painter tension (and thus the effect on speed) is significantly less if you adjust the length so that the dinghy is constantly falling down one of the waves in your wake and not trying to climb up it.
This was one of several excellent bits of advice I got with my first (second-hand inflatable) dinghy. Earlier this year we also tested the one about a single tube and the thwart being enough to keep you afloat in the event of a sudden deflation.
different colours made of tears
Post Reply