Page 1 of 1
Claymore Comes Out
Posted: Tue Oct 12, 2010 2:56 pm
by claymore
Yesterday
15% anode wear since Easter
Hull powerwashed off and looks wonderful.
Despite my £10:00 investment in lanolin, the prop was completely barnacled up.
So much for that old failed sage Shard's advice.....
Re: Claymore Comes Out
Posted: Tue Oct 12, 2010 5:34 pm
by jim.r
maybe if the prop had turned a couple of times there'd have been fewer barnacles?
Re: Claymore Comes Out
Posted: Tue Oct 12, 2010 8:04 pm
by claymore
That may have happened if our mutual acquaintance wasn't such a wuss.....
Re: Claymore Comes Out
Posted: Tue Oct 12, 2010 9:00 pm
by Aja
...had me a tad worried there me old son....
Donald
Re: Claymore Comes Out
Posted: Wed Oct 13, 2010 3:17 pm
by claymore
Why do they all live in a cupboard anyway?
Re: Claymore Comes Out
Posted: Wed Oct 13, 2010 6:56 pm
by So_Sage_of_Lorne
claymore wrote:Why do they all live in a cupboard anyway?
An open & shut case, they are all Doors fans.
Re: Claymore Comes Out
Posted: Thu Oct 14, 2010 10:45 pm
by Old_Glow_In_The_Deep
claymore wrote:Yesterday
15% anode wear since Easter
Hull powerwashed off and looks wonderful.
Despite my £10:00 investment in lanolin, the prop was completely barnacled up.
So much for that old failed sage Shard's advice.....
Black Lead (or it’s modern equivalent) is the stuff to apply / use…. I have the photo’s!
Re: Claymore Comes Out
Posted: Fri Oct 15, 2010 8:39 am
by claymore
Would Zebrite do it?
Re: Claymore Comes Out
Posted: Fri Oct 15, 2010 2:39 pm
by Old_Glow_In_The_Deep
Hi C,
It should be OK.... not tested this product myself.
Have a look at this:
http://www.ybw.com/forums/showthread.ph ... ead&page=2
OG.