Variable Pitch Props and Shaft Brakes

How things work, what's hot and what's not
User avatar
BlowingOldBoots
Old Salt
Posts: 616
Joined: Tue Apr 03, 2012 12:03 am
Boat Type: Rival 41C
Location: Hogganfield Loch

Variable Pitch Props and Shaft Brakes

Postby BlowingOldBoots » Thu Dec 19, 2019 12:20 am

Hello,

I am fitting a new propellor to the yacht and considering something like a Bruntons Auto Prop. A colleague suggested that because I have a hydraulic gearbox, which can't be locked, I will need a shaft brake. The logic I think is that water flow across the prop due to sailing and causes it to rotate and find a pitch angle. Conversely it needs a locked shaft so that the blades will pitch to neutral.

What do you think? Anyone got any experience of this? A brunt's is expensive enough as it is without fitting a shaft brake.

Cheers,

Alastair
BlowingOldBoots

What time does the 24hour garage close?
http://www.rivalowners.org.uk

User avatar
ash
Yellow Admiral
Posts: 1716
Joined: Tue Mar 01, 2005 12:14 pm
Boat Type: Moody 346
Location: Tarbert, East Loch Tarbert, Loch Fyne, Scotland

Re: Variable Pitch Props and Shaft Brakes

Postby ash » Thu Dec 19, 2019 9:15 pm

Hi Alistair

I inherited a Brunton Autoprop with the boat and find that there are some aspects of it I don't like.

I'm on the boat with just an old phone so will tell you more over the weekend.

Certainly, you would need to stop the shaft to get it to fold.

With a mechanical gearbox, the technique is to leave the engine driving in forward gear at tickover and stop the engine.

Speak later.

Ash
"This is a sailing Forum"
Albin Vega "Mistral" is now sold


Return to “Gear and Gadgets”

Who is online

Users browsing this forum: No registered users and 1 guest