Read the Label

Post your handy hints and tips here - with pix if possible. Lavish prizes may be awarded from time to time.
User avatar
Admiral of the White
Posts: 1982
Joined: Thu Jan 03, 2008 8:17 pm
Boat Type: Marcon Claymore
Location: Clyde

Read the Label

Postby sahona » Fri Nov 05, 2010 11:16 pm

If you want it to do what it says on the tin, you have to honour your side of the contract...
Glueing some wood recently, I didn't "wipe off the excess with a damp cloth".
The result was a lot of sanding due to the chemicals in the glue turning the area black to quite a depth.
Better to heed the advice of those who know! 20' - 30' Berths available, Clyde.
Cruising, racing, maintenance facilities. Go take a look, you know you want to.

User avatar
Master Mariner
Posts: 174
Joined: Mon Dec 28, 2009 7:51 pm
Boat Type: Newbridge Voyager
Location: My World

Re: Read the Label

Postby Old_Glow_In_The_Deep » Mon Nov 08, 2010 10:34 pm


Master Mariner
Posts: 146
Joined: Thu Feb 23, 2006 3:35 pm
Location: Cinque Ports

Re: Read the Label

Postby spuddy » Thu Nov 11, 2010 12:24 am

Sounds like the polyurofoams - turns my palms black anyway. Well wear rubber gloves then......tip 2.

Return to “Tip of the Week”

Who is online

Users browsing this forum: No registered users and 3 guests